Outlet units now available

Tag: FuroSystems

Free FUZE Electric Scooter Upgrade to 750W and 422Wh on All Orders!

We just upgraded the specs of all FUZEs, those already pre-ordered and all the ones that we will produce in the future, without any increase in price. This sounds crazy but here is why:First of all, we want to make you happy, and what better way to do this than over-deliver and exceed your expectations.

Secondly, when we launch a product we first go through a lengthy design and testing phase which is based on prototypes mostly manufactured at our workshop in London. We then send these prototypes out for certifications and beta trials as you can see on our review page. Once everything is validated and we feel that we finally got that sweet spot, the one at peak performance and optimal pricing, we send designs, plans and prototypes to our factories. This allows us to set up the required assembly lines with them. At this point, sometimes we find some cost-saving efficiencies in manufacturing, logistics or parts supply chain which allow us to further improve our product before delivery. This happened on the SIERRA, the FURO X and is now happening to an even greater extent with the FUZE.

Essentially, we stepped up our power system from 600W to 750W. We also changed our cell assembly to offer a 48V 8.8Ah battery instead of a 36V 8.8Ah, hence an energy increase of more than 105Wh to reach 422Wh instead of 315Wh. Practically, this means more acceleration, steeper inclines, more speed and more range at no extra costs!

We can’t wait to deliver this to you, you won’t be disappointed!

PS: The Fuze has had huge success with more than 450 sold over the last four weeks. As such the current batch is about to sell out! After which a new batch will be produced for delivery at the start of june!

New FREE accessories for the FuroSystems FX folding ebike and the SIERRA mountain ebike with each order!

In the middle of this warm and beautiful European summer, we have a few surprises to announce. First of all, we would like to highlight the fact that you are our main focus, providing you with the highest levels of satisfaction and happiness through our bikes and the value they add to your daily lives is, and will always be, our number ONE objective.Over the last few months we have been developing accessories for the SIERRA and the FX. A complete set of fenders for the SIERRA, able to withstand the toughest of environments and conditions, and a complete set of fenders, a rear luggage carrier and a kickstand for the FX to make sure that your commute and city journeys are as smooth and convenient as they could be, while not impeding on the folding process and storage space. The thing is though, unlike most of the other guys out there, we are going to offer these to you with all new bikes orders for free, because we believe they are part of your FuroSystems ebike experience.

FuroSystems FX Folding Electric Bike with Accessories

Although we are accelerating our production rates considerably, more and more of you are getting in touch to get your hands on a FX or a SIERRA. The faster you order, the earlier we can guarantee you will receive your ebike. We will strive to continuously accelerate our factory output while never compromising on quality or performance, you can be sure of that!

FuroSystems SIERRA Electric Mountain Bike with Accessories

The Furo X is sold out for delivery in May and 10 days left for 25% DISCOUNT

Taking our bikes from paper directly to you and making them your new favorite way of commuting, cycling or just having fun has truly been a formidable adventure and keeps getting better!The FURO community is growing day after day and we have officially just sold out our batch of FX for delivery in May. The SIERRA is almost gone as well with only 2 left in stock.

As most of you are aware, our 25% discount is also ending very soon. You can rest assured that it still applies to all purchases made through our website until it expires. This means that our next batch of SIERRA and FX is still covered by the discount until the 15/05. It is currently planned for delivery in September, although it will most likely come earlier than this as we are working very hard to accelerate our production rate and optimise our supply chain.

If you are thinking about getting a FX or a SIERRA, we strongly advise to make the most of the discount, particularly as our next batch will also have a limited stock.

We are always available and very happy to help you, so if you have any questions or requests please don’t hesitate to contact us.

The Physics Behind Electric Bikes Through Numbers

Our stock of FX and SIERRA for delivery in May has almost run out, and that is a lot earlier than we anticipated. You guys are loving it and to celebrate that, we are going to give you a short but complete article on the physics governing your ebikes rides.Let’s start with the protagonist itself, the ebike, here we will have a look at the SIERRA in particular. The SIERRA is made of a full carbon frame which has to be structurally strong enough to support the sum of your weight, the ebike’s weight with all its components, and the weight multiplication and shocks due to bumps and other obstacles on the road. In addition to all the typical bicycle equipment (disk brakes, gears, chain pedals, wheels, etc) the SIERRA’s frame also has to carry a motor, a battery, an electronic controller and a computer. These components are all relatively heavy with respect to the frame of the bike but remain light once you add your weight to the equation, even for the skinniest of you.

SIERRA Configuration

The SIERRA is equipped with a torque sensor which measures how much pressure you are exerting on the pedals. In turn, it sends a message to the controller which calculates how much power from the motor is immediately required. At the same time, the computer scales the controller’s calculations with respect to the assist level you are set on. Eventually, the controller which is connected to the battery opens a channel between the battery and the motor and allows high power currents to flow in a certain pattern so as to activate the motor and power your ride.

This then makes you go forward and pick-up speed. We will now focus on what is happening once you have reached a speed of 20km/h and are accelerating by 1km/h per second or reaching 25km/h after 5 seconds on a flat asphalt road. According to the second law of Newton, all the forces acting on the bike and yourself while you move forward are equal to your total mass multiplied by your acceleration. This can be written:

with F the sum of the forces in Newtons, m the total mass in kgs and your acceleration in m/s².

Sir Isaac Newton

The forces acting on the bike and yourself while you are moving are:

  • Your own applied through the back wheel of the SIERRA: we will call it Fy and it is measured in Newton
  • The motor’s applied through the back wheel and the chain of the SIERRA: we will call it Fm and it is in Newton
  • The aerodynamic drag, due to your movement through the air of the atmosphere, which can be calculated in Newton using the following equation:
    with Cd the coefficient of drag, p the density of the air, V your velocity and A your frontal area.
  • The rolling resistance of the tyres on the road which can be calculated in Newton using:
    with Cf the rolling resistance coefficient of the tyres on the road, m your mass in kg and g the gravitational constant g=9.81m/s², m*g is essentially the force in Newton exerted downwards by your weight on the bike.

FuroSystems SIERRA Sum of Forces

First of all, we can calculate the drag. In a standard relaxed cycling position on the SIERRA, your frontal area is likely to be 0.6m² and your coefficient of drag: 1.15. The density of the air at sea level is 1.225 kg/m3 and your velocity is 20km/h which is equivalent to 5.6 m/s.

So we get: D = 0.5 * 1.15 * 1.225 * 5.6² * 0.6 = 13 N.
The rolling resistance coefficient of bicycle tyres on asphalt is equal to 0.004, assuming you are 75kgs, the weight of the SIERRA being 20kgs, your total weight becomes 95kgs.

Hence, your rolling resistance is Fr = 0.004*95 = 0.38 N.
So the sum of the forces can now be written:

Fy + Fm – D – Fr = m*a

with m your total weight (95kgs) and your accelerations in m/s².

Also, note that the sign of the forces in the sum depends on the direction these forces are acting. If they act in the direction of the movement, then they are positive, if they act in the opposite direction, they are negative. We can replace the variable with the values we calculated knowing that an acceleration of 1km/h/s is equivalent to 0.28 m/s²:

Fy + Fm – 13 – 0.38 = 95 * 0.28 which is equivalent to Fy + Fm = 40 N
We know that the wheels of the SIERRA measure about 0.70m in diameter and therefore 0.35m in radius. We also know that torque is a force multiplied by a distance. Hence, the torque generated by the combined efforts of your legs and the SIERRA’s motor is 40*0.35=14 Nm. We can even get the total power by multiplying this by the angular velocity of the wheel, or the speed at which it rotates. We know that its perimeter is 2 * PI * Radius = 2.2m. As we are going at 5.6m/s, this gives 2.5 rotations of the wheels per second or an angular velocity of 15 rad/s (multiply by 2 * PI).

Hence, on a flat asphalt road, in order to maintain an acceleration of 1 km/h per second while being at a velocity of 20km/h, the total power needed from you and the SIERRA together is 15*14= 210W.

As the BOFEILI mid-motor of the SIERRA produces 350W of continuous power and more than 600W of peak power, at this cadence you will only be exploiting a third of the power of the beast. Depending on your assist level, you can either fully provide the 210W through your legs or entirely rely on the SIERRA, it’s your choice and that is the magic of electric cycling!

Do not hesitate to ask questions in the comments, we will be happy to answer them if anything needs to be made clearer!

First batch shipment and end of preorders

It’s official! Our first production batch is currently at sea and will reach our European warehouse around the 15th of May. We will then unload our containers and ship your bikes to you at lightning speeds, you will receive them within 2-3 days.It’s been a great adventure getting our bikes from paper right to your home and we are pretty sure that you won’t be disappointed! This also marks the end of pre-orders for the FX and the SIERRA. On the 15th of May, all 25% pre-order discounts will be discontinued. Our stock is also limited, so for those of you thinking about getting one of our great ebikes, now is the time 😉

Our mission to get commuters and cyclists beautiful, affordable, high performance ebikes is going better than ever, and we will keep working to get you the best, always!
Thank you all for your support!

Why an eBike is so good for commuting

This is going to sound cliché, but FuroSystems genuinely started from the following thought: what are some of the biggest problems in our society right now? And can the latest technologies combined with clever engineering solve them?The global population is growing which with urbanisation is causing population densities around cities to increase. In addition, personal transportation systems such as cars, vans and motorcycles are bulky and noisy. Add to that the fact that about a century ago, we chose fossil fuels over electricity (rightly so at the time), we now have a nice combo of polluting, traffic stimulating and impractical vehicles. As this has even become deadly, we urgently need something better.

Traffic Jam

At FuroSystems, we really think that the clear solution is electric bicycles. They are now powerful enough and offer sufficient autonomy to take a rider anywhere, around any city in the world, for multiple days. They are compact, fast, quiet and clean. This is why we decided to use our expertise to help accelerate our society’s transition to this amazing and fun mode of transportation. How? By making them better, more practical, more attractive and more affordable.

As with any great innovation, electric bikes have their sceptics, the main argument is that it’s essentially a way to cheat cycling, something for the lazy.

According to Steve Garidis, the UK’s Bicycle Association’s operations director: “It’s quite difficult to explain what [an ebike] feels like: you’re still cycling but it’s like being an Olympic athlete; you can go faster and longer; hills are less effort. The acceleration is quite fun, even for the most sceptical grown up.”

Happy FuroSystems Electric Bikes Customers

So yes, ebikes do make it easier. They allow older or handicapped people to go places they can’t anymore or never could, and ride with their loved ones. It makes commuting and cycling more manageable. However, they also allow everyone else to experience a new level of acceleration, speed and performance. They don’t remove the effort if you still want it, they just make everything better, more intense, it’s an enhancement of your physical capacities whether you are fit or not. For example, our bikes the SIERRA and the FX give you the option of riding them unpowered making them feel exactly like normal bikes, but they also allow you to multiply your acceleration, uphill capacity and speed, whenever you feel like it. To make it even simpler, they are a 250 W to 600W power add on to your body which you can choose to activate on demand.

Deciding to use an ebike for your commute instead of your car, scooter or moped is probably the best thing you could do today. No more pollution, no more noise, no more fuel, no more insurance and a healthier lifestyle. Folding bikes like the FX are also incredibly more practical, particularly when they are that light while staying very powerful and offering great range, not far off from that of a 50cc petrol scooter.

Electric bicycles are the mode of transportation of the future, they literally solve every single problem you could think of in modern transportation and greatly enhance cycling. In addition, battery technology is close to making significant leaps forward with technologies such as solid-state chemistry, supercapacitors or 2D materials such as graphene. You can trust that we will be here to implement each of these advances in your FuroSystems ebikes as soon they are out!

A little eye candy for those of you that stayed with us to the end 🙂

Carbon Fiber: the wonder material explained

Most of you will have heard about it. Carbon fiber, the wonder material that makes everything lighter and stronger. It’s used in supercars, aerospace machinery and the FuroSystems SIERRA and FX (could we call them superbikes?).FuroSystems FX Full Carbon Fiber Folding Ebike

So what is it? Its basic element is carbon, it’s made of 6 electrons, 6 protons and 6 neutrons and without it, you wouldn’t exist, nor would any life on Earth. When you overcook your food or burn some wood, the residual ash is mainly carbon. Carbon fibers consist of these atoms being assembled in crystals and bonded in a direction that is approximately parallel to the fiber’s long axis. Each fiber is between 5 and 10 micrometers (millionths of a meter) wide or 2 to 20 times narrower than a human hair. This configuration gives them a strong strength to volume ratio. Individual fibers are relatively weak on their own but once woven together they lead to a very strong cloth.

Carbon Fiber fibers

At this point, carbon fiber is just a fabric similar to the ones made of cotton for your t-shirts, only much stronger and much more expansive. To transform it into a useful and solid engineering material, the cloth is mixed with a plastic resin such as epoxy to form a composite also called carbon fiber reinforced composite. The manufacturing process usually consists of a technician laying the fibers on a mould, painting them with the chosen resin and then baking the assembly to obtain a part with the desired shape. The result is an extremely rigid and very high strength to weight ratio component.

Carbon Fiber Airplane Wing

Carbon fiber reinforced composites (CFRP) are about ten times stronger and 5 times lighter than steel and eight times stronger while 2 times lighter than aluminium. In addition, their very manufacturing removes the need for welds and allows for sleeker and smoother shapes. CFRP indeed tend to be more brittle and crack slightly more easily than aluminium or steel. However, this is easily compensated through design by ensuring that the load necessary to lead to a crack will always be much larger (MUCH LARGER) than the greatest load your bike will ever experience during its use.

Also, the fact that carbon frames cannot be fixed once broken is a myth, they absolutely can, in a very rapid and discreet way as well. After all, if it’s trusted to make the wings of giant machines that fly hundreds of km in the sky, costing hundreds of millions of dollars and carrying hundreds of people (that’s a lot of hundreds), then it can most likely be used to enhance your biking experience, and that’s exactly what we’ve done. Aerospace engineering at the service of happy riders!

This video details well the frame manufacturing process used by KOENIGSEGG and FuroSystems:


Scroll to top