Latest Posts

How to get the most from your electric bicycle or scooter battery? – the best battery tips

Batteries are a fascinating thing. Electricity transformed our society for the better, opening the door to wonderful advances in science, technology, and making our every day lives much easier and comfortable in the process. A notable example being machines such as electric cars, electric bicycles and electric scooters which facilitate urban life and daily movements while lowering pollution and our detrimental impact on the environment. However, electricity is quite hard to store. Today, the best commercially available way we have to do this, the best meaning the way with the most optimal balance between volume, price and energy delivery is Lithium-ion cells. You can have a look at our previous article on ebike batteries to get a bettetr idea of how they work exactly.

Now, most of you will know that Lithium-ion batteries have a certain life span. Let me make this a bit clearer for you. As you store and extract power from your battery, the cells that constitute it do some work, heating up at the same time and slowly deteriorating, mainly due to an increased internal resistance. When you read the quoted manufacturer cycle life of your battery, it only tells you how many cycles (fully charged to fully discharged) your battery can go through before reaching 70% of its original capacity. It won’t die at this point though, its capacity will keep decreasing linearly until the cells inside of the battery eventually fail after an indeterminate amount of time which will depend largely on manufacturing quality, maintenance and intensity of use.

Most modern Lithium-ion cells will have a cycle life of 500 cycles. This means that after 500 complete charges and complete discharges of your electric bike or electric scooter at their standard charge and discharge rates, you will get about 70% of the capacity you had during your first use. Charging or discharging faster will significantly decrease this.

However, there is a trick to multiplying this cycle life significantly. First of all, there is the obvious more moderate use. You usually cannot do much about charging speed as this is provided by your electric vehicle manufacturer through their charger, but most of the time these are slow enough to preserve the integrity of your battery. On the other hand, you can make sure you reduce your average riding speed, and the intensity of your accelerations and electric decelerations. On top of giving you more range per charge this will also increase your cycle life by a non-negligible amount.

The optimal operational and storage temperature for modern Lithium-ion batteries, whether in electric cars, ebikes or escooters is 23°C. Storing it in cooler places will usually be better than in warmer places. However, using your battery in colder environments will reduce your immediate capacity much more than in warmer environments, based on the 23°C baseline mentioned above.

The absolute best thing you can do for your battery, and we are talking 10x improvements in cycle life, is to manage your charge and discharge levels. From our learnings at FuroSystems and my personal experience as an aerospace engineer specialising in advanced space systems, charging your battery in a way that keeps its cells at a maximum voltage of 3.9V and subsequently using only 50% of your battery capacity can take your cycle life from 500 cycles to 6000 cycles.

A practical example for our eTura and our Furo X which use a similar battery configuration, would be charging your battery to 39V or four bars (almost 5 bars) on the computer and discharging it to roughly two bars on the computer. For the Fuze, that would be a charge to 50.7V and a discharge to 39V (can be checked on computer, see user manual). If you are not a FuroSystems owner, you can usually divide the nominal voltage of your battery by 3.6 to get the number of cells in series in your battery and multiply that by 3.9 to get your recommended charge level. It is very important to note that every 10 to 15 cycles, you should conduct a full charge and full discharge of your battery to make sure that you do not lose any energy capacity due to memory phenomenons.

Eventually, it all depends on how you want to use your electric bike or scooter. You can either go full power all the time, make the most of if every day and have a lot of fun, keeping in mind that after 500 cycles you will be at roughly 70% of your original capacity. Or, you can pay attention to how you use your EV in order to maximise cycle life, which will also mean less range per charge.

In case you are part of the latter, here are our recommendations:

  • Store your battery in a cool and dry place between 15°C and 23°C.
  • Use your electric bicycle or electric scooter preferably between 15°C and 35°C rather than 0°C and 15°C.
  • Watch your average speed and the intensity of your acelerations and decelerations (when using battery regen).
  • Charge your battery to 3.9V per cell (roughly 75% capacity) and discharge down to roughly 25%, so a 50% discharge of your battery from 75% down to 25%. This could get you up to 6000 cycles of life. Of course charging higher and discharging further will decrease this progressively until you reach your quoted 500 cycles under normal use.
  • Always make sure that you have one full charge and full discharge cycle every 10 to 15 charge cycles.

We hope this helps, and don’t hesitate to ask questions in the comments!

Leave a Reply

Scroll to top